GPI M30-G8N Meter, GAL NPT (BOT-TOP) UL

The M30 Mechanical Fuel Meter is designed for the field measurement of thin viscosity petroleum fuels only and intended for use with pump systems in the 5 to 30 GPM or 19 to 114 L/m flow range (not intended for gravity flow systems). Using mechanical gears, these meters translate flow data from a nutating disk into calibrated units which are indicated on the face of the meter.

Note: Designed, tested and approved for use with thin viscosity petroleum fuels such as gasoline blends (up to E15), diesel fuel blends (up to B20) and kerosene.

Features

• Easily attaches to the new G20 fuel transfer pump
• Features simple four-bolt connections that allow the meter to be mounted in multiple directions
• Magnetic drive replaces the driveshaft and seal, eliminating driveshaft leaks
• Within +/- 2% across a flow range from 5 to 30 GPM (19 to 114 L/min)
• Easy to calibrate

Specifications

• Unit of Measure: U.S. Gallon
• Flow Range: 5 to 30 GPM
• Inlet/Outlet: 1 in. NPT
• Max Batch Total: 999.9
• Max Cumulative Total: 999,999.9
• Operating Temperature: -20° F to 125° F (-29° C to 52° C)
• Max Operating Pressure: 50 PSI (3.4 bar)
• Technology: Nutating Disc with Magnetic Drive
• Accuracy: ±2%; (Accuracy is factory calibrated using diesel fuel)
• Material (Housing, Cover & Fittings): Aluminum
• Wetted Material:
• Nutator Assembly: PBT (Polybutylene Terephthalate), Stainless Steel
• Seals: NBR (Nitrile Butadiene Rubber)
• Mag-Drive: Acetal, Stainless Steel, Neodymium (Nickel Plated)
• Approvals: UL Listed